Skip to content
hbr30e

HBR30-G

 VTOL HYBRID GAS POWERED UAV

GENERAL

DESCRIPTION

HBR30-G is an indigeniously designed high performance fixed wing UAV, which features an Vertical Take-Off and Landing (VTOL) airframe. Equipped with gasoline engine for flight, HBR30-G can can operate in most challenging environments with 6 hours of endurance. Main application areas differ from battery powered HBR-30E because of the long endurance.

APPLICATION

AREAS

  • Border Securİty
  • Facility Surveillance
  • Quick Reaction Forces
  • Target Detection and Tracking
  • Search and Rescue
  • Environmental and Pollution Tracking
hbr30g

KEY

FEATURES

  • 6 hours of flight endurance
  • VTOL takeoff, no runway or tarmac required
  • Autonomous RTH (Return To Home) when datalink disconnects
  • Reliable operation capabilities in humid and dusty environments
  • Flying capabilities in windy environment up to 15 knots
  • Different payloads available for different mission requirements
    (e.g. gimbals, mapping equipment, LIDAR, Multispectral sensor) up to 5 kg

DIMENSIONS

hbr30g_boyut

SPECIFICATIONS

Airframe Material Carbon-Fiber Composite
Maximum Take-Off Weight 34 kg / 75 lbs
Flight Time 6 hours
Cruise Speed 65 knots
Top Speed 85 knots
Wing Span 3.84 m / 12.6 ft
Lenght 2.2 m
Tail Height 0.4 m
Total Height 0.75 m
Max Payload 5 kg / 11 lb (incl. fuel)
Flight System Autonomous Take-off, flight and landing
VTOL Motors 4x BLDC, 3 kW each
Forward Flight Motor Gasoline powered, 2 cylinder boxer engine, 3.5 kW
Fuel Capacity 5.5 kg
Starting option Manuel start with electrical starter
On-Board Alternator 3 Phase AC, 300W
Flight Ceiling 15000 ft MSL
Take-off Method VTOL
Telemetry Range 1W, 20 km with whip antenna
GCS Telemetry Range 1W, 20 km with directional antenna
Communication Security Encrypted
Power Distrubution System Regulated 24V, 12V, 8V, 5V powered by
an independent System Battery
Payload Gimbal, Mapping Equipment, LIDAR,
Multispectral Sensory
Temperature Range -5 + 35 C° 
Required Personnel
Transportation Single case, 2.3 m × 0.9 m × 0.9 m